Special design for shop-windows animation
Useful for many types of touch controls
R1,R2_____1M 1/4W Resistors R3,R4____47K 1/4W Resistors C1_______10µF 25V Electrolytic Capacitor C2______470pF 630V Ceramic or Polyester Capacitor D1-D3____1N4002 100V 1A Diodes Q1-Q3_____BC337 45V 800mA NPN Transistors RL1_______Relay with SPDT 2A @ 220V switch Coil Voltage 12V. Coil resistance 200-300 Ohm J1________Two ways output socket Sensor____Aluminium or copper thin sheet with the dimensions of a post-card, glued at the rear of the same (approx. 15x10.5 cm.) Thin screened cable
The purpose of this circuit is to animate shop-windows by means of a
capacitive sensor placed behind a post-card-like banner. The card is placed
against the glass inside the shop-window, and the visitor can activate the relay
placing his hand on the card, from the outside. Especially suited for toy-shops,
the circuit can activate model trains, small electric racing cars, lights etc.
Further applications are left at user's imagination. Adopt it to increase the
impact of your shop-window on next Christmas season!
Q1, Q2 & Q3 form a high impedance super-Darlington that drives the relay, amplifying the 50Hz alternate mains-supply frequency induced in the sensor by the human body. C1 & D2, D3 ensure a clean relay's switching. Power supply can be any commercial wall plug-in transformer with rectifier and smoothing capacitor, capable of supplying the voltage and current necessary to power the relay you intend to use.
Note: For proper operation, circuit ground must be connected via a small value, high voltage-rating capacitor to one side of the mains supply socket. The "Live" side is the right one.