Ethernet 10/100Base-T (rj-45) connector

pinout

8 pin RJ45 female connector at the network interface cards/hubs

Pin	Name	Description	EIA/TIA 568A	EIA/TIA 568B or AT&T 258A
1	TX+	Tranceive Data+	White with green strip	White with orange stripe
2	TX-	Tranceive Data-	Green with white stripe or solid green	Orange with white stripe or solid orange
3	RX+	Receive Data+	White with orange stripe	White with green stripe
4	n/c	Not connected	Blue with white stripe or solid blue	Blue with white stripe or solid blue
5	n/c	Not connected	White with blue stripe	White with blue stripe
6	RX-	Receive Data-	Orange with white stripe or solid orange	Green with white stripe or solid
7	n/c	Not connected	White with brown strip or solid brown	White with brown strip or solid brown
8	n/c	Not connected	Brown with white stripe or solid brown.	Brown with white stripe or solid brown.

Note: TX & RX are swapped on Hub´s. Also, please note that it is very important that a single pair be used for pins 3 and 6. If one conductor from one pair is used for pin 3 and a conductor from another pair is used for pin 6, performance will degrade.

8 pin RJ45 male connector at the cables

Source:www.pinouts.ru

Your name:

Your Email:

Comment:
Type the characters: * Refresh