40 pin IDC male connector at the controller & peripherals (0.75 | Pin
| Name
| Dir
| Description |
1 | +5V | | +5 VDC |
1 | +5V | | +5 VDC |
1 | RET | | Return (Ground?) |
1 | RET | | Return (Ground?) |
1 | GND | | Ground |
2 | DB0 | | Data Bus 0 |
1 | GND | | Ground |
4 | DB1 | | Data Bus 1 |
1 | GND | | Ground |
6 | DB2 | | Data Bus 2 |
1 | GND | | Ground |
8 | DB3 | | Data Bus 3 |
1 | GND | | Ground |
10 | DB4 | | Data Bus 4 |
1 | GND | | Ground |
12 | DB5 | | Data Bus 5 |
1 | GND | | Ground |
14 | DB6 | | Data Bus 6 |
1 | GND | | Ground |
16 | DB7 | | Data Bus 7 |
1 | GND | | Ground |
18 | PARITY | | Data Parity (odd Parity) |
24 | GND | | Ground |
26 | TMPWR | | Termination Power |
32 | /ATN | | Attention |
36 | /BSY | | Busy |
24 | GND | | Ground |
38 | /ACK | | Acknowledge |
40 | /RST | | Reset |
42 | /MSG | | Message |
24 | GND | | Ground |
44 | /SEL | | Select |
50 | /I/O | | Input/Output |
46 | /C/D | | Control/Data |
24 | GND | | Ground |
48 | /REQ | | Request |
1 | RET | | Return (Ground?) |
1 | RET | | Return (Ground?) |
1 | +5V | | +5 VDC |
1 | +5V | | +5 VDC |
Note: Direction is Device relative Bus (other Devices). Connector is: AMP 6-176135. | 40 pin IDC female connector at the cable (0.75 |