Cisco EIA/TIA-530 DTE cable (DB60 to DB25) cable

60 Pin1	Signal	25 Pin	Signal	Direction DTE DCE2
J1-11 J1-12	TxD/RxD+ TxD/RxD-	J2-2 J2-14	BA(A), TxD+ BA(B), TxD-
J1-28 J1-27	RxD/TxD+ RxD/TxD-	J2-3 J2-16	BB(A), RxD+ BB(B), RxD-
J1-9 J1-10	RTS/CTS+ RTS/CTS-	J2-4 J2-19	CA(A), RTS+ CA(B), RTS-
J1-1 J1-2	CTS/RTS+ CTS/RTS-	J2-5 J2-13	CB(A), CTS+ CB(B), CTS-
J1-3 J1-4	DSR/DTR+ DSR/DTR-	J2-6 J2-22	CC(A), DSR+ CC(B), DSR-
J1-46 J1-47	Shield_GND MODE_2	J2-1 -	Shield -	Shorted
J1-48 J1-49	GND MODE_1	- -	- -	Shorted
J1-5 J1-6	DCD/DCD+ DCD/DCD-	J2-8 J2-10	CF(A), DCD+ CF(B), DCD-
J1-24 J1-23	TxC/RxC+ TxC/RxC-	J2-15 J2-12	DB(A), TxC+ DB(B), TxC-
J1-26 J1-25	RxC/TxCE+ RxC/TxCE-	J2-17 J2-9	DD(A), RxC+ DD(B), RxC-
J1-44 J1-45	LL/DCD Circuit_GND	J2-18 J2-7	LL Circuit_ GND	-
J1-7 J1-8	DTR/DSR+ DTR/DSR-	J2-20 J2-23	CD(A), DTR+ CD(B), DTR-
J1-13 J1-14	TxCE/TxC+ TxCE/TxC-	J2-24 J2-11	DA(A), TxCE+ DA(B), TxCE-

Arrows indicate signal direction: indicates DTE to DCE, and indicates DCE to DTE.

¹ Any pin not referenced is not connected.
² The EIA-530 interface cannot be operated in DCE mode. A DCE cable is not available for the EIA-530 interface.